You are in HPMA - DRIZORO Products Page

 

Excellent waterproofing properties. Withstands both positive and negative hydrostatic pressures.

Allows application on wet substrates.

The coating allows the substrate to breath and thereby it does not form a water vapour barrier.

Final layer of MAXSEAL can work as a decorative finish, saving further enhancing paint costs.

Easy to use and no maintenance required.

Resistant to aggressive environment such as seacoasts and zones with atmospheric pollution.

It resists weathering and freeze/thaw cycles, longer lasting than paints and other coatings.

Very good adherence to substrate. It fills and seals all porous of the surface and also becomes part of the structure of the surface.

Suitable for use in contact with drinking water.

Once MAXSEAL is cured, it can be covered with protective or fixing mortars.

Environmentally friendly

 

 

 

Uses

• Waterproofing of retaining walls, car parks, basements, elevator pits, tanks and dams.

 

 

Waterproof against rainwater and permeable to water vapour.

Decorative. Applied using a brush or roller, an attractively textured coating can be obtained.

Single component. Only requires water for preparing the mix.

Applied in a single layer. Excellent coverage and savings in man-hours.

Long lasting and low maintenance. Cleaned with water, with or without pressure.

 

Application Fields

• Waterproofing and protection of water retaining structures, such as drinking water tanks, reservoirs, water mains and swimming pools.
• Waterproofing of below-grade structures like basements, retaining walls, foundations, tunnels, galleries subjected to both positive or negative high water pressure.
• Internal and external waterproofing and protection of new and old buildings, façades against dampness, rain, pollution and aggressive environments.
• Waterproofing and protection of concrete against carbonation, freeze-thaw cycles, de-icing salts in highways and chlorine penetration in public works, irrigation channels, dams, retaining walls and water treatment plants, bridges, etc.
• Tile fixing and waterproofing of bathrooms, kitchens and other wet rooms in hotels, hospitals, offices and residential buildings, also suitable for exterior applications.
• Waterproofing of jardinières, terraces and balconies under the pavement.

 

 

Provides a fully-flexible coating which ensures complete waterproofing even in the most severe conditions, as high negative water pressure.

Covers shrinkage and hairline cracks of the concrete.

Acts as an anti-fracture membrane between the substrate and other finishing coats if applied.

Excellent protection for concrete, being both a CO2 an chlorine (Cl-) barrier and thereby preventing carbonation and electrochemical corrosion.

Permeable to water vapour, allows the substrate to breathe.

Resistant to abrasion and UV rays.

Withstands atmospheric pollution, corrosive effects of salt water and de-icing salts and freeze/thaw cycles.

Resists hydrostatic negative pressure from ground water when used for underground interior applications.

Excellent adhesion and easy to use. Does not require bonding agents and can be applied on wet surfaces

Non-toxic and chloride-free. Suitable for contact with potable water.

Longer lasting that other coatings, avoiding maintenance costs.

Environmentally friendly Specially recommended to complement other products of DRIZORO system as MAXSEAL

 

 

 

 

Its quick-setting time, from 15 to 20 minutes, allows for an agile repair process.

It forms part of the substrate and the repairs are structurally sound, with properties comparable or higher than concrete.

Very good thixotropy without slump or the need for using form work.

It does not shrink, avoiding risk of cracks when sets.

Odour-free and non-toxic, making it the ideal material to use in badly ventilated places, such as water tanks, shafts, sewers, etc.

Does not contain any chloride.

Only needs the addition of water for mixing.

 

 

Application fields

• Maintenance of industrial areas damaged by aggressive environment, acid rain, atmospheric pollution, etc.
• Structural concrete repair affected by corrosion of reinforcements in marine environment, bridges, harbors, dams, etc
• Repair of concrete structures with carbonation process.
• Repair of damaged concrete by deicing-salts, freeze/thaw cycles, mechanical impacts, etc.
• Concrete repair affected by repeated loads.
• Repair of pre-fabricated concrete elements.

 

ADVANTAGES

ADVANTAGES

For emergency repairs and resetting manhole covers on streets, public roads and concrete factory floors.

Traffic can pass over the repair within two hours of application.

Just mix with water.

The addition of MAXCRYL to the mixing liquid produces an even stronger mixture.

It adheres well to the substrate and its grey colour blends in with the concrete.

It is non-toxic and odourless which makes WATMAT an ideal product for areas with little ventilation.

Waterproof. Very low water absorption.

 

Application Fields

• Sealing expansion joints with an in service joint movement up to 15%.
• Joints in permanent immersion in pipelines, water reservoirs, water treatment plants, etc.
• Joints of concrete prefabricated elements and ceramic in facades and building construction
• Sealing of active cracks in concrete and masonry.
• Pointing mortar on substrates subject to movement.

 

Allows movement capability of joint up to 15%.

Very high weather resistant and durability. No maintenance required.

Excellent adhesion on damp surfaces. No bonding agentneeded.

Non slump on vertical joints.

Suitable for joints in permanent contact with water

Easy to apply and finish.

Non toxic and non flammable, environmentally friendly.

Can be painted once cured with the desired colour

 

APPLICATIONS

External waterproofing of block and brick, fibrous sheet and porous tile facades.· Prevention of moss growth and dirt retention on pavers, walls and roofs.· Reduction of sandstone decay due to salts and low pH precipitation.

Elimination of white salt spotting. Treatment of rising damp in old homes. Protection of reinforced concrete against steel corrosion by chloride diffusion.

SPECIFICATIONS

Product Oligomeric iso-octyl silane, in a mineral spirit base,13 % active.
Coverage Varies widely, dependant on absorption characteristics. E.g. from 3 m2/lit for concrete to ½ m2/lit. for highly porous material. A trial area of 1-2 m2 will assist in determining application rate.